精密干冰清洗机 丨 SP27C
SP27C Dry ice cleaning blasting machine Technical features:
丨SP27-C application scenario: It can be used for mold cleaning of fine and complex grooves, cleaning treatment of complex parts decontamination, dust removal, degreasing, cleaning suitable for polishing mirror molds, and polyurethane foaming residue treatment.
Precision casting aluminum mold removal and release agent treatment, glass products, plastic products, leather workpiece decontamination and dust removal process is also suitable for CN precision machining deburring process of some materials.
Since SP27-C dry ice blasting is a fine particle, it can completely cover the surface of the workpiece, which is very suitable for the pre-treatment of sheet metal parts, plastic parts and composite materials.
丨Comparison of SP27-C with conventional models: The conventional model uses 3mm columnar dry ice pellets and is only suitable for heavy dirt surface cleaning operations with strong workpieces, simple grooves and easy peeling. When the dry ice is sprayed on the surface of the workpiece, the dry ice particles are distributed in a point contact distribution, and there is a large area between the action points that do not contact the dry ice, so that the traditional model can only treat the heavy dirt of the large workpiece, and can not clean the more precise and meticulous process requirements.
丨Competitive advantages: The solution of other brands of dry ice cleaning machine manufacturers is to use a crushing screen or spray gun to set up a grid to force crushing dry ice, the disadvantage of this practice is that the dry ice particles are uneven, only about 30% of the dry ice is crushed, and most of the dry ice is not broken to the effective particle size, and there is a risk of damage to the precision workpiece. In addition, this practice seriously reduces the cleaning efficiency of the equipment; Another solution is to use block dry ice for secondary grinding, although this model can solve the above problems, but due to structural limitations, the cleaning operation is only suitable for small parts and small area of the operation scene, and special specifications of dry ice bricks are required. SP27-C can solve the above problems perfectly, first of all, it is a common 3mm standard general purpose cleaning dry ice specification that is easy to purchase. This equipment uses a secondary extrusion mechanism to re-die cast 3mm dry ice particles into dry ice particles below 0.15mm, and the cleaning efficiency meets the requirements of ordinary large-area cleaning and cold spraying operations.
丨Model features: The main difference between SP27-C small particle dry ice cleaning machine and ordinary 3mm particle cleaning machine is that the dry ice acting on the surface of the workpiece is distributed in a surface contact, and the dry ice is evenly distributed to the surface of the workpiece to achieve seamless coverage. At the same time, the mass of the dry ice particles that have been overmolded is small, so the impact kinetic energy on the workpiece is also small, so the risk of impact damage to the workpiece is reduced. Therefore, the SP27-C combines the high efficiency of an ordinary pellet machine with the advantages of a brick shaved ice cleaning machine that is lightweight and has low impact force and does not damage non-metallic workpieces. The mechanical structure design of SP27-C also adopts the design module of anti-caking, blockage and leakage with airtight gap compensation and continuous feeding by spinning. The structure adopts stainless steel waterproof and corrosion-resistant design, the gas hose and cable are connected by quick connectors, the operation panel is simple and clear, easy to use, and the post workers do not need professional training, and can master all the operations with simple training.
设备应用场景展示
SP27C fittings
| 1/2″Dry Ice Blasting Hose (10mm optional) | Hand-held ejectors |
| 16mmCompressed air hose (optional 12mm) | Special safety protective gear |
| Dedicated adjustable straight dry ice nozzle (optional flat nozzle) | Related adapters |
| Electrostatic discharge device | One-year worry-free warranty |
| Power cord |
SP27B parameter
| size—–50cm*65cm*75cm | Dry ice consumption——0.1-1kg/min |
| weight—-65kg | Supply voltage—-AC 220V/ 50hz |
| Silo capacity—-15kg | Device power—-500w |
| Air input pressure—-3-12bar | Operating noise—-65-100db |
| Compressed air output pressure—-2-10bar | Dry ice particles – columnar particles with a diameter of φ3mm |
| Compressed air flow—0.5-1m³/min |
